- Call Our Experts :
- 01932 851081
-
Extra Tall Internal Doors – Non Standard Sized Doors Made To Order
By SWD Team
Tall interior spaces evoke that sense of grandeur in our homes and one of the most effective ways to make your space feel more open and taller is by using extra tall internal doors and taller passageways. By doing this you create the perception of height without making your ceilings any higher.
Unlike most SWD are able to personalise any of our exceptional doors to your specific requirements. We can manufacture large interior doors up to 2700mm tall and incorporate 30 and 60 minute fire-rated protection.
With this in mind SWD highlight some of our recent projects where non standard sized doors have been supplied and installed by us using standard, sliding and Bi-folding doors.
Extra Tall Internal Doors
In a recent development shown below we supplied the model 150 ALU with polished inlays. We supplied these as pre hung door sets with a 120x30mm stepped architrave. The doors are 2.4 metres in height. The architraves were painted a light grey colour rather than white, to compliment the decor. These doors were fire rated to FD30. The main doors were fitted with polished stainless steel pull handles, with the rest of the R100 doors employing polished lever handles. You can see more of this project here.
Extra Tall Sliding Doors
This project below in St George’s Hill is an impressive 17,000 square ft residence for which we produced sliding doors that consisted of four doors set together using our model C27 at an imposing 2.7M high x 4M across. Take a look at the rest of the project here.
Extra Tall Bi-Folding Doors
We greatly enjoyed the opportunity to display our products alongside an interior designer to create this luxurious project. The door model used for these tall bi-folding doors was our classic 2 panel R101 with a white lacquered finish incorporating a glazed upper panel. The door height is an extra tall 2.25 metres. Upstairs we finished the property with standard sized doors with a dark wedge stain on walnut which you can see here.
Inspiration
Below we have used our Lattice standard sized doors with floor to ceiling sidelights and matching fanlight. To showcase the high ceilings, and to add something a little different, we installed matching lattice room dividers. This placed a strong emphasis on the fantastic high ceilings and created a spectacular top end look which enabled light to flood in and maximise the feeling of space.
Whether you are looking for extra tall internal doors, as featured in this article, or standard size doors SWD can meet any request needed to provide exceptional luxurious internal doors. If you would like to discuss your project further you can contact us here.
Share This Post
October
2017
Archives
- April 2020
- January 2020
- October 2019
- August 2019
- August 2018
- April 2018
- February 2018
- January 2018
- November 2017
- October 2017
- September 2017
- August 2017
- July 2017
- June 2017
- May 2017
- December 2016
- October 2016
- September 2016
- August 2016
- July 2016
- June 2016
- May 2016
- April 2016
- March 2016
- February 2016
- January 2016
- December 2015
- November 2015
- October 2015
- September 2015
- August 2015
- July 2015
- March 2015
- February 2015
Recent Posts
-
14 August, 2018
SWD Increases Value of Kensington Project
-
30 April, 2018
London Design Week 2018